Product Overview
Technical Summary
| Product type designation | IO-Link DQ 8x24VDC/2A |
|---|---|
| Digital outputs | 8 |
| Load voltage 1L+ | 24 V DC; permissible range 18 V to 30 V |
| Load voltage 2L+ | 24 V DC; permissible range 20.4 V to 28.8 V |
| IO-Link protocol | 1.1 |
| Transmission rate | 38.4 kBd (COM2) |
| Cycle time, min. | 2.1 ms |
| Connections | 8x M12 |
| Degree of protection | IP65/67 |
| HW functional status | FS01 |
| Firmware version | V1.0.x |
Key Features
- Product designation: IO-Link DQ 8x24VDC/2A with HW functional status FS01 and firmware version V1.0.x.
- Digital outputs: 8 current-sourcing digital outputs with IEC 61131 type 2 output type and electronic short-circuit protection per channel.
- Load voltage 1L+: Rated value: 24 V DC, supplied from 1Us+ of the IO-Link master; permissible range: 18 V to 30 V.
- Load voltage 2L+: Rated value: 24 V DC, supplied via an M12 connector L-coded; permissible range: 20.4 V to 28.8 V.
- IO-Link interface: IO-Link protocol 1.1, 38.4 kBd (COM2), minimum cycle time 2.1 ms, and Port type A connection for IO-Link devices.
- Connections and protection: 8x M12 and IP65/67 degree of protection; unshielded IO-Link cable length is 20 m maximum.
Frequently Asked Questions
What does Siemens 6ES7142-5AF00-0BL0 identify?
It identifies a SIMATIC ET 200AL IO-Link DQ module with 8 digital outputs, 24 V DC load voltage, 8x M12, and IP65/67 degree of protection.
Which specifications distinguish this exact module variant?
Check the IO-Link DQ 8x24VDC/2A designation, HW functional status FS01, firmware version V1.0.x, 8 outputs, and IO-Link protocol 1.1.
What code and nameplate details should be checked before quotation?
Check the complete order number 6ES7142-5AF00-0BL0 together with the product designation, HW functional status, firmware version, output count, connections, and protection degree.
What quantity and destination are needed for a quotation?
Provide the required quantity and destination together with the complete order number 6ES7142-5AF00-0BL0.
