Product Overview
Technical Summary
| Product designation | SIPLUS ET 200S EM 2AQ I |
|---|---|
| Base product | 6ES7135-4GB01-0AB0 |
| Analog outputs | 2 |
| Output ranges | -20 mA to +20 mA; 4 mA to 20 mA |
| Current connection | Two-wire connection supported; four-wire connection not supported |
| Cycle time | All channels, max. 1.5 ms |
| Resolution | 14 bit including sign; 4 to 20 mA: 13 bit; ±20 mA: 14 bit |
| Load voltage L+ | 24 V DC from the power module |
| Load impedance | Current outputs, max. 500 Ω; inductive load, max. 1 mH |
| Operating temperature | -25 °C to 70 °C |
| Product lifecycle | Product cancellation |
Key Features
- Product designation: SIPLUS ET 200S EM 2AQ I, based on 6ES7135-4GB01-0AB0, with conformal coating.
- Analog outputs: Has 2 analog outputs with -20 mA to +20 mA and 4 mA to 20 mA output ranges.
- Current connection: Supports two-wire connection for current output; four-wire connection for current output is not supported.
- Resolution and cycle time: Resolution with overrange is 14 bit including sign; 4 to 20 mA uses 13 bit and ±20 mA uses 14 bit. Cycle time for all channels is max. 1.5 ms.
- Supply and protection: Rated load voltage L+ is 24 V DC from the power module, with reverse polarity protection. Potential separation exists between the channels and backplane bus, and between the channels and load voltage L+.
- Operating conditions: Ambient temperature during operation is -25 °C to 70 °C. Shielded cable length is max. 200 m.
Frequently Asked Questions
What does Siemens order number 6AG1135-4GB01-2AB0 identify?
It identifies a SIPLUS ET 200S EM 2AQ I analog output module based on 6ES7135-4GB01-0AB0, with conformal coating.
Which specifications distinguish this MLFB variant?
The variant has 2 analog outputs, supports -20 mA to +20 mA and 4 mA to 20 mA, uses two-wire current-output connection, and operates at -25 °C to 70 °C.
Does the module support four-wire connection for current output?
No. Four-wire connection for current output is not supported; two-wire connection is supported.
Which code and nameplate details should be checked before quotation?
Check the complete order number 6AG1135-4GB01-2AB0, the SIPLUS ET 200S EM 2AQ I designation, the base product 6ES7135-4GB01-0AB0, and the conformal coating detail.
What information is needed for a quotation?
Provide the required quantity and destination together with the complete order number 6AG1135-4GB01-2AB0.
