Product Overview
Technical Summary
| Product designation | SIPLUS S7-300 SM 326F DQ8 |
|---|---|
| Base product | 6ES7326-2BF41-0AB0 |
| Supply voltage | 24 V DC; 1L+ |
| Digital outputs | 8 |
| Rated output current | 2 A for signal "1" |
| Operating temperature range | -25…+60 °C |
| Switching frequency | 30 Hz with resistive load; 2 Hz with inductive load; 10 Hz on lamp load |
| Isolation test | 500V AC for 1 min (internal voltage limiting to ±120V) |
Key Features
- Product designation: SIPLUS S7-300 SM 326F DQ8 spare part based on 6ES7326-2BF41-0AB0, with conformal coating.
- Fail-safe digital outputs: 8 fail-safe digital outputs with sinking-sourcing operation up to category 4 (EN 954-1) and SIL 3 (IEC 61508).
- Supply voltage: Rated supply voltage: 24 V DC; 1L+. Rated load voltage L+: 24 V; 2L+, 3L+.
- Output current: Signal "1" rated output current: 2 A. For 0 to 40 °C, the maximum is 2 A with horizontal installation and 1 A with vertical installation; for 40 to 60 °C, the maximum is 1 A with horizontal installation.
- Diagnostic features: Diagnostic alarm is parameterizable, diagnostic information is readable, and fail-safe operation and group error SF indication are available.
- Electrical separation: Digital outputs have potential separation between channels, in groups of 4, and from the backplane bus and electronics power supply.
Frequently Asked Questions
What specifications distinguish 6AG1326-2BF41-2AY0?
It is a SIPLUS S7-300 SM 326F DQ8 spare part with conformal coating, 8 fail-safe digital outputs, 24 V DC supply, and 2 A rated output current.
What should be checked against the nameplate for this order number?
Check the complete order number 6AG1326-2BF41-2AY0 and the base product 6ES7326-2BF41-0AB0.
What output-current limits apply?
For 0 to 40 °C, the maximum is 2 A with horizontal installation and 1 A with vertical installation. For 40 to 60 °C, the maximum is 1 A with horizontal installation.
What quantity and destination are needed for a quotation?
Provide the required quantity and destination when requesting a quotation.
