Product Overview
Technical Summary
| Product designation | LOGO! CMK2000 communication module |
|---|---|
| Supply voltage | 24 V DC rated; permissible range 19.2 V to 28.8 V DC |
| Current consumption | 0.04 A maximum |
| Ethernet interface | 1 industrial Ethernet interface, 1 RJ45 port |
| Other interface | 1 EIB/KNX interface |
| Transmission rate | 100 Mbit/s over Ethernet; 9 600 bit/s over KNX |
| Mounting | 35 mm DIN rail, 4 spacing units wide |
| Protection | IP20 |
| Configuration | Web interface; web server supported |
| Firmware | Firmware update possible: Yes |
| Communication | LOGO! communication supported; S7 basic communication not supported |
Key Features
- Product designation: LOGO! CMK2000 communication module for integrating LOGO! 8 into the building system bus KNX.
- Supply and current: Rated supply: 24 V DC; permissible range: 19.2 V to 28.8 V DC; maximum current consumption: 0.04 A.
- Interfaces: 1 Ethernet industrial interface with 1 RJ45 port and 1 EIB/KNX interface.
- Transmission rates: Maximum transmission rate: 100 Mbit/s over Ethernet and 9 600 bit/s over KNX.
- Installation and protection: Mounting on 35 mm DIN rail, 4 spacing units wide; IP20 degree of protection.
- Configuration and diagnostics: Configuration and diagnostics via web interface; web server supported; RUN/STOP LED and firmware update possible.
Applications
- KNX building-system integration: Integrating LOGO! 8 into the building system bus KNX.
- Web-based configuration and diagnostics: Configuring and diagnosing the module via its web interface.
- Clock synchronization: Synchronizing the clock through the supported clock-synchronization function.
Frequently Asked Questions
What product does Siemens order number 6BK1700-0BA20-0AA0 identify?
It identifies the LOGO! CMK2000 communication module for integrating LOGO! 8 into the building system bus KNX.
Which specifications distinguish this LOGO! CMK2000 variant?
It has a 24 V DC rated supply, 1 Ethernet RJ45 port, 1 EIB/KNX interface, and a maximum current consumption of 0.04 A.
What mounting and connection details should be checked?
Check mounting on 35 mm DIN rail with a width of 4 spacing units and the KNX terminal connection of 0.6 mm2 to 1.0 mm2.
What code and nameplate details should be verified before inquiry?
Verify the complete order number 6BK1700-0BA20-0AA0 and the LOGO! CMK2000 designation.
What quantity and destination are needed for a quotation?
Provide the required quantity and destination when requesting a quotation.
