6ES7214-1BG31-0XB0
6ES7214-1BG31-0XB0 identifies a SIMATIC S7-1200 CPU 1214C with AC/DC/relay, 14 digital inputs, 10 relay outputs, 2 analog inputs, and PROFINET.…
Siemens Product Category
We supply Siemens SIMATIC PLCs, signal modules and distributed I/O for machine and process automation.
Products
Search SIMATIC PLC & I/O products by Siemens MLFB, part number or product code, or select a product group from the category menu.
6ES7214-1BG31-0XB0 identifies a SIMATIC S7-1200 CPU 1214C with AC/DC/relay, 14 digital inputs, 10 relay outputs, 2 analog inputs, and PROFINET.…
6ES7672-8FC01-0YA0 identifies a SIMATIC S7-1500 Failsafe Software Controller CPU 1508S F with V21.9, a single license for 1 install, and…
6ES7355-2SH00-0AE0 identifies a SIMATIC S7-300 FM 355-2S temperature control unit with 4 channels, 4 AI, 8 DI, 8 DO, and…
6ES7405-0RA02-0AA0 identifies a SIMATIC S7-400 PS405 power supply with 24/48/60 V DC input, 5 V DC/20 A output, and 2…
6ES7672-7AC02-0YK0 identifies a SIMATIC S7-1500 CPU 1507S upgrade with a single license for 1 installation, V31.1 software, and 6 languages.…
6ES7134-6PA20-0BD0 identifies a SIMATIC ET 200SP AI Energy Meter 480VAC ST for BU type D0, with channel diagnostics and firmware…
6ES7137-6CA00-0BU0 identifies a SIMATIC ET 200SP CM 1xDALI master module with 160 mA integrated bus power supply and support for…
6ES7135-4GB01-0AB0 is a SIMATIC DP electronics module for ET 200S with 2 analog current outputs, 24 V rated load voltage,…
6ES7193-4CA50-0AA0 identifies 5 SIMATIC DP TM-E15C26-A1 terminal modules for ET 200S, with spring terminals and 2x6 connections. Verify the code…
6ES7194-2MN15-0AA0 is a Siemens 15 m shielded bus cable with 4-pole M8 connectors at both ends, PUR sheath, and IP65/67…
6ES7648-0EH00-1BA0 is a Siemens SIMATIC PC removable tray for a 3.5" hard disk or 2.5" SSD. It is supplied without…
Siemens 6ES7528-0AA80-7AA0 identifies a SIMATIC S7-1500 spare front door for 35 mm width power supply and PTP CP units, packed…
Product identification
SIMATIC PLC & I/O products can differ by function, interface, hardware version and configuration. Use the complete identifier and installed equipment details to avoid ordering a different variant.
Copy the complete MLFB, part number or product code, including every suffix shown on the label.
Include the current controller, panel, drive, motor or network details when compatibility must be assessed.
State the quantity, required condition and delivery destination for each requested item.
Multiple products
Send multiple Siemens MLFBs or product codes in one request. Add the quantity, required condition and destination for each item, plus any compatibility or replacement question that needs assessment.