Product Overview
Technical Summary
| Product designation | BU type U0 |
|---|---|
| Based on | 6ES7193-6BP00-0DU0 |
| Conformal coating | Class 2 for high reliability; Type 1 protection against fouling |
| Terminal type | Push-in terminal |
| Process terminals | 16 |
| AUX bus terminals | 0 |
| P1 and P2 bus terminals | 2 |
| Current carrying capacity | Maximum 10 A up to 60 °C |
| Horizontal operating temperature | -40 °C to +70 °C; +85 °C for 10 minutes under OT4, ST1/ST2 according to EN 50155 |
| Protection of unused interfaces | Supplied plug covers must remain in place over unused interfaces during operation |
Key Features
- Product designation: BU type U0, based on 6ES7193-6BP00-0DU0.
- Conformal coating: Conformal coating with Class 2 for high reliability and Type 1 protection against fouling.
- Terminals: Push-in terminals; 16 process terminals to the I/O module, 0 terminals to the AUX bus and 2 terminals with connection to the P1 and P2 bus.
- Current carrying capacity: Maximum 10 A up to 60 °C, for the P1 and P2 bus, and for the AUX bus.
- Operating temperature: Horizontal installation: -40 °C to +70 °C, with +85 °C for 10 minutes under OT4, ST1/ST2 according to EN 50155. Vertical installation: -40 °C to +50 °C.
- Mechanical configuration: Width 20 mm, height 117 mm, depth 35 mm; 1 slot; without AUX terminals; new potential group.
Applications
- Railway applications: The source specifies railway applications, including rail vehicles, signal and telecommunications systems, fixed installations and railway power supply equipment.
Frequently Asked Questions
Which specifications distinguish 6AG2193-6BP00-4DU0?
It is BU type U0, based on 6ES7193-6BP00-0DU0, with conformal coating, push-in terminals, 16 process terminals, 0 AUX bus terminals and no AUX terminals.
What terminal type and conductor sizes does this variant have?
It has push-in terminals. The conductor cross-section is 0.14 mm² to 2.5 mm², with the supplied ferrule conditions: 0.2 mm² minimum without wire end ferrule and 1.5 mm² maximum with wire end ferrule.
What installation temperature range should be checked?
For horizontal installation, the range is -40 °C to +70 °C, with +85 °C for 10 minutes under OT4, ST1/ST2 according to EN 50155. For vertical installation, it is -40 °C to +50 °C.
What should be checked when requesting a quotation?
Check the complete order number 6AG2193-6BP00-4DU0, then provide the required quantity and destination.
